Make an appointment at our concept.room for your individual project consulting
Veneer Knotty Oak Rough Cut
BackWood speciesKnotty Oak Rough Cut
Bot. NameQuercus spp.
Tradename EnOak knotty Rough Cut
Type
Deciduous tree
Price
Color
Light Brown,
Brown
Thickness
0.6 mm
Wood Structure
Quarter Cut,
Crown Cut
SurfaceRough
TreatmentNatural
Country of harvestEurope
Usages
Interior,
Furniture,
Door
Certification
available as FSC 100% & FSC-CW
NoteFor veneers with a rough cut structure, we strongly recommend using a white glue.
If there is partial glue penetration, it can be brushed out at right angles to the grain after pressing. We recommend to veneer a few samples in advance to get a feeling for the ratio of glue application and pressing pressure.
In the case of knotty wood types, knots may occasionally appear. This is unavoidable with knotty wood and is not a reason for complaint. The hole can be filled, for example.
If there is partial glue penetration, it can be brushed out at right angles to the grain after pressing. We recommend to veneer a few samples in advance to get a feeling for the ratio of glue application and pressing pressure.
In the case of knotty wood types, knots may occasionally appear. This is unavoidable with knotty wood and is not a reason for complaint. The hole can be filled, for example.
Detailed Description
In favourable locations it grows to 50 m high with diameters up to 200 cm, but usually shorter and weaker. The shaft is well grown throughout, often twisted and knotless up to 15 m. The bark is thick, deeply cracked lengthwise and dark grey. The tree reaches a high age of several hundred years.
Tradenames and other names
Bot. Name: Quercus spp.
Tradename De: Eiche astig Sägeroh
Tradename En: Oak knotty Rough Cut
Properties
Raw density: 430 - 960 Kg/m3
Occurrence
The oak is spread almost all over Europe, namely in Norway up to 63 degrees northern latitude and in Russia up to 57 degrees northern latitude, as in the Caucasus and in Asia Minor, furthermore in the south up to central Spain, Sicily and also on Crete oak is found.
Characteristic and wood color
Sapwood and heartwood are sharply separated. The sapwood is generally narrow and yellowish-white. As it is not weather-resistant, it has no economic significance and is removed before processing. The heartwood is greyish-yellow when freshly cut, later darkening to light to dark brown when exposed to air. Annual rings and growth zones are not clearly visible. The pores form an uninterrupted transverse zone in the early wood of the annual rings. Medullary rays broad and very clearly visible. They form unevenly sized and differently shaped "mirrors" in the quarter section, which are characteristic of oak. The structure varies according to location and age, usually straight to twisted, the texture also varies from fine to coarse.
